Roll slitter (Full automatic type) - Máy ép phế liệu

Sản phẩm tiêu biểu

Roll slitter (Full automatic type)
---------------------------------------------------------
Giá : Liên hệ

It is equipped with the electronic chucking with air source, automatic core shaft up and down, and automatic brinding device.
The movement (left, right, back and forth) of cutter carriage is very fast with using servomotor so that the recycle time can be shortened drastically.

Type	KC-216A	KC-316A	KC-416A	KC-516A
Roll diameter	φ200mm	φ300mm	φ400mm	φ500mm
Roll width	1600mm
Core internal diameter	1 inch - 3 inches
Cutting accuracy	±0.1mm
Blade size	φ250mm	φ381mm	φ480mm	φ620mm
Chuck rotation speed	MAX350RPM・Free rotation
Blade rotation speed	MAX 210 rpm
Forward cutting speed	Three level automatic shift
Touch panel	The cutting width and cutting number of pieces can be preset in three levels. Malfunctional warning.Automatic grinding.
Option	Blade cooling device (air source required). Silicon coating device.
Power	AC200V 　3phases　50Hz/60Hz

cutting materials ：

film・rubber・adhesive tape・glass fiber・paper・foaming materials・razor・tarpaulin・vinyl・carbon sheet・interlining cloth・nonwoven・fiber material・other materials

The longitudinal and cross feeds for tape cutting are done automatically.

Type	722-CAⅡ/200	722-CAⅡ/300	722-CAⅡ/400	722-CAⅡ/500
Roll diameter	φ200mm	φ300mm	φ400mm	φ500mm
Roll width	1600mm
Core internal diameter	１inch～３inch～６inch
Cutting accuracy	±0.1mm
Blade size	φ250mm	φ381mm	φ480mm	φ620mm
Blade rotation speed	MAX 350 rpm・Free rotation
Chuck rotation speed	MAX 210 rpm
Forward cutting speed	Three level automatic shift
Touch panel	The cutting width and cutting number of pieces can be preset. Malfunctional warning. Manual grinding.
Option	Blade cooling device (air source required), Silicon coating device, automatic grinding,
Power	AC200V 　3phases　50Hz/60Hz

cutting materials ：

film・rubber・adhesive tape・glass fiber・paper・foaming materials・razor・tarpaulin・vinyl・carbon sheet・interlining cloth・nonwoven・fiber material・other materials

The cutting width is to be controlled automatically and the cutting is done by manual operation.

Type	722-CⅡ/300	722-CⅡ/400	722-CⅡ/500
Roll diameter	φ300mm	φ400mm	φ500mm
Roll width	1600mm
Core internal diameter	１inch～３inch
Cutting accuracy	±0.1mm
Blade size	φ381mm	φ480mm	φ620mm
Blade rotation speed	MAX 350 rpm・Free rotation
Chuck rotation speed	MAX 210 rpm
Touch panel	Cutting width setting, Manual grinding
Options	Blade cooling device (air source required), Silicon coating device, automatic grinding, safty cover (shown in photo)
Power	AC200V 　3phases　50Hz/60Hz

cutting materials ：

film・rubber・adhesive tape・glass fiber・paper・foaming materials・razor・tarpaulin・vinyl・carbon sheet・interlining cloth・nonwoven・fiber material・other materials

It is conpact design so that a small diameter substrate can be cut manually regardless of installation space.

Type	KCSS-113
Roll diameter	φ150mm
Roll width	1300mm
Core internal diameter	１inch～
Cutting accuracy	±0.1mm
Blade size	φ150～φ240mm
Cutting width setting	Touch panel
Cutting method	Manual lever
Cutting method	Electronic chuck
Power	AC200V 　3phases　50Hz/60Hz

Super large full automatic roll slitter　KG-1215-AG（Substrate：MAXφ1200ｍｍ、L＝1500ｍｍ）

Cutting is done by straight blade. Automatic grinding device keeps the blade edge sharp.
The movement (left, right, back and forth) of cutter carriage is very fast with using servomotor so that the recycle time can be shortened drastically.